Which compressor!

All things Air Compressor Related
User avatar
SCOTTRODS
Posts: 5949
Joined: Thu Jun 03, 2010 2:43 pm
My Location:
Location: Garland, Texas

Re: Which compressor!

Post by SCOTTRODS » Thu Aug 04, 2016 7:21 am

My budget and research always takes me to Ingersol Rand and Quincy for Rotary compressors. I have had opportunity to use both and they're fine.
Image

See photos of my work at
http://s244.photobucket.com/albums/gg6/terrellster/" onclick="window.open(this.href);return false; and at http://www.facebook.com/profile.php?id=100001788886297" onclick="window.open(this.href);return false;
EMAIL scott@scottrodspc.com

User avatar
kbonarek
Posts: 144
Joined: Sun Jan 08, 2012 2:45 pm
My Location: Rigaud
Location: Rigaud, QC

Re: Which compressor!

Post by kbonarek » Sat Aug 06, 2016 9:35 am

On a side note: glass bead probably isn't the best thing to be using for achieving a profile for coating.

If it actually is glass bead and not crushed glass, it's useful life is also quite short. (30 cycles if I recall)

Crushed glass can cause you problems with aluminium as well...some coaters have had issues with crushed glass being impregnated into the substrate and showing up as little bubbles or bumps after coating. (Depending on the grit size).

Best bet if you can afford to switch is to go with Aluminium Oxide (80-100 grit) or Garnet.

Just a suggestion ;)

Post Reply