Cutters check in thread

User avatar
boredinhawaii
Posts: 379
Joined: Tue Apr 05, 2011 6:40 pm
My Location:
Location: Waianae, Hawaii

Re: Cutters check in thread

Post by boredinhawaii » Fri Jun 01, 2012 4:09 pm

alleykat wrote:My setup

Image

Need to get a water hose to fill up the watertable,got tired of going bucket by bucket. :lol:

that's a nice set up :mrgreen:

May I ask where you ordered and how much $$ you paid ?
"Everybody has to believe in something...I believe I'll have another drink." —W.C. Fields

User avatar
Dano
Posts: 2431
Joined: Sun Jun 13, 2010 1:45 pm
My Location:
Location: Laramie, Wyoming

Re: Cutters check in thread

Post by Dano » Tue Jan 15, 2013 12:06 pm

Here is a good video of what we do, in case anyone isn't familiar with cutting.
I don't cut aluminum, because my cutter is only a 30amp machine. AL sucks the life out of it, and it only has a 10% duty cycle.
The PlasmaCam table is the same as mine, though.

This one's for you, Lou... :D

http://www.youtube.com/watch?v=qS6gW_Rr ... e=youtu.be" onclick="window.open(this.href);return false;
Dano.
Custom Plasma Cutting.
Serving Laramie, Wyoming since Thursday.
Droberts@ironpequod.com - (615)300-2882

RBMW
Posts: 12
Joined: Tue Jan 07, 2014 10:35 pm
My Location: Missouri

Re: Cutters check in thread

Post by RBMW » Thu Jan 23, 2014 12:43 pm

Hello to all!!

Loving this site. Sooo much info on powder coating.

We have a Plasmacam Sampson table 5' x 10' with a Hypertherm 65 cutter. The smoke removal system is a 3200 cfm fan from global with the garage door cracked in the winter.

Currently building a powder coating oven and a spray booth. Soon to follow is a hydrographics dip tank and rinse booth.

Web site is rosebudmetalworks.com

Largemouthlou
Posts: 498
Joined: Mon Aug 16, 2010 5:19 pm
My Location: home
Location: Palm Bch Gardens, Fl
Contact:

Re: Cutters check in thread

Post by Largemouthlou » Thu Nov 06, 2014 7:55 pm

Guess I missed this forum!!!! :mrgreen: Home build table with presicion plasma rails, gantry, and gear reductions, CNCandC electronics, 1250 hyper therm. Have powermax torch and feather touch to mount. also just made deal to upgrade to their newer electronics..

And I love to cut aluminum :mrgreen:

Better at that then powder coating for sure!! :lol:

User avatar
Streetwerkz
Posts: 488
Joined: Fri Jun 04, 2010 9:22 am
My Location:
Location: Columbus, Ohio
Contact:

Re: Cutters check in thread

Post by Streetwerkz » Sat Nov 08, 2014 4:19 pm

I've cut a part or two over the past 10 years, we have a 5'x10' with a hypertherm 1250 torch
Josh

Post Reply