EW gun can you disassemble

Support & testimonies for Powder365 powder coating guns
Post Reply
pavetim
Posts: 227
Joined: Thu Jul 14, 2016 7:07 pm
My Location: japan

EW gun can you disassemble

Post by pavetim » Fri Nov 25, 2016 7:43 pm

As title says, can you take apart an eastwood dual voltage gun for cleaning?

User avatar
duke46
Posts: 11369
Joined: Thu Jun 03, 2010 9:32 pm
My Location: East Coast NC
Location: New Bern NC
Contact:

Re: EW gun can you disassemble

Post by duke46 » Sat Nov 26, 2016 6:04 pm

They should clean themselves right well as long as you have compressed air and an air nozzle and just put it into the pickup tube and give it HELL.

Not sure if they still make it with a little screw plug on the side but the one I had did and I unscrewed it and that was all she wrote for it applying powder correct until one of our guys told me how to adjust it. It was not placed there for cleaning but for adjusting the powder flow. Yep I fixed it and then sent it to another coater for him to use because his place had been broken into and they had took his way better gun and other stuff so I had to help him out the best way I could.
All I have said is said just for meanness so I don't have to argue with anyone!

http://www.pcitdad.com" onclick="window.open(this.href);return false;

Post Reply