Clear coat issues

News from Powder 365, New products, Specials
Post Reply
teksuport322
Posts: 2
Joined: Thu Jan 05, 2017 8:55 pm
My Location: Texas

Clear coat issues

Post by teksuport322 » Thu Jan 05, 2017 9:06 pm

Can you use hot coat clear over decals? How far seat should you be to prevent Orange peel type finish. I can have a piece come out beautiful and then I let it cool then clear coat with clear vision and it blurs the finish with an orange peel type finish. Can you put too much clear should you only go over lightly. I'm scared to use it again. Plus people want a cup with a sticker clear coated over. Not sure if they are using a resin to do this or hot coat. Please help

WiseAssYT
Posts: 901
Joined: Thu Aug 27, 2015 12:16 pm
My Location: Leaps ahead of you

Re: Clear coat issues

Post by WiseAssYT » Fri Jan 06, 2017 9:03 am

Your clear is too heavy.

Apply about half as much , clear has no pigments or fillers , so less flows easier.

Shoot a few sample panels.

teksuport322
Posts: 2
Joined: Thu Jan 05, 2017 8:55 pm
My Location: Texas

Re: Clear coat issues

Post by teksuport322 » Fri Jan 06, 2017 9:45 am

Ok thanks. So you can cover decals the same? I'll try less I thought I'd see it like when I do a color

Post Reply