Free Downloads

Welcome to Powder 365
Fabit
Posts: 1
Joined: Sat Oct 03, 2020 11:43 pm
My Location: 76010

Re: Hairy Powder

Post by Fabit » Sat Oct 03, 2020 11:53 pm

I’ve been coating for a couple years, small, one off runs using the EZ250. I’ve noticed with some powder I get a hairy post coat. Typically I abrasive blast then wipe down with alcohol then blow part off , both steel and aluminum. After curing it seems to be okay but curious what causes this?
Thanks

Post Reply