Removing old logo from Stainless Steel tumbler

Prep Topics, Pre-Treatment Chemicals
Post Reply
david9h
Posts: 59
Joined: Wed Aug 31, 2011 9:49 am
My Location:
Location: Raleigh, NC

Removing old logo from Stainless Steel tumbler

Post by david9h » Wed Dec 26, 2018 7:37 am

Hi All,
I've got a customer that wants me to remove an old logo from his Yeti tumbler and re-powder coat with a new design. I tried Acetone and it didn't budge. I can't sand it off because the new design and the old logo will overlap and the new design will be left stainless. I obviously don't know what the old design was put on with. Anyone have some experience with such a removal or suggestions on what to try next?
Thanks,
David

sw bill
Posts: 492
Joined: Sat Dec 10, 2011 12:40 pm
My Location: grand rapids michiga
Location: grand rapids michigan

Re: Removing old logo from Stainless Steel tumbler

Post by sw bill » Wed Dec 26, 2018 6:04 pm

Buy a new cup, $30 for a new cup or who knows how much labor screwing with a old one.
Check us out on Facebook. Slacker garage shop SgS

david9h
Posts: 59
Joined: Wed Aug 31, 2011 9:49 am
My Location:
Location: Raleigh, NC

Re: Removing old logo from Stainless Steel tumbler

Post by david9h » Thu Dec 27, 2018 10:34 am

Really!? You have more money than I do. Anyone have another suggestion?

Miller821
Posts: 126
Joined: Fri Sep 07, 2012 9:39 pm
My Location: Carbondale, IL
Location: Carbondale, IL

Re: Removing old logo from Stainless Steel tumbler

Post by Miller821 » Thu Dec 27, 2018 7:42 pm

I think that he is implying to buy a new cup for $30, and work that into your price. Beats wasting time if you can't get it off without screwing it up. A razor blade won't remove it if you carefully pick at it?

david9h
Posts: 59
Joined: Wed Aug 31, 2011 9:49 am
My Location:
Location: Raleigh, NC

Re: Removing old logo from Stainless Steel tumbler

Post by david9h » Thu Dec 27, 2018 10:01 pm

I tried gas for a couple of hours and that didn't work, but then tried degreaser for a couple of hours and the design slide right off. Yay!

Post Reply